caliber wont start

You say the battery is good. Try tightneing the connections on the battery posts. It may be that the battery can provide power for the lights, and other things, but when called upon for high current the voltage drops. Are the lights bright? Try to measure the voltage drop when you try to crank it. Or try to jump it.

a ten year old battery is kaput...no amount of visiting with your bench charger will take back those ten years...they are not made from LEAD anymore, tin/antimony alloy is what they are now~....yeah, my poppa's a battery engineer goin on 35 years~

will stop accepting a charge-up ten percent per year~

If you live in the salt belt would recommend wire brushing the 1/0 battery cable to the chassis connection and the cable goin' to the engine as well~

A lot of people have issues with the relay that is located under the drivers side front wheel well corroding.It is located in a box similar to a typical fuse box. A wire can corrode right off or the connections become too corroded to make contact. I believe their are a few other relays located within the same box.

Why is my 2010 dodge caliber starting on own?

I have a 2008 cabliber and it want crank evn if i tdy to get it jump off

me too

Had to replace the starter...problem fixed!

I got brand new starter an battery an still won't turn over an also PC valve

Iv also checked the relay

so i took the battery and completely drain all the power out of the car over night to change the crankshaft sensor when i hooked everything up the next day it has power but not attempt to turn over. i checked the relays on the driver side under the bumper and they are all working. not sure what else it could be

Want my lights come on home work everything work but I can't turn on two weeks full cylinder 204 caliber