Photo previous post is two-prong connector to actuator, and has good power supply to this point.
3 Answers
Where does the "actuator" side go?
1 people found this helpful.
? This pic is of DC two prong connector to the motor/actuator. It comes directly from the switch on dash. Full 12v power to connector, yet plug into motor, nothing. Again, this is the second motor from dealer....hard to believe two bad ones in a row unless whole supply is bad! Other than that, no ideas......
Apply 12 volts directly to the motor and see if it runs. If it does, your problem is in the connector. If it doesn't run, the motor is bad.