do you need any special tools , because access to bolts are not easy , bottom one behind engine mount and can't see the top one

Asked by Guru8V4JC Dec 28, 2019 at 12:55 PM about the 2008 Hyundai Santa Fe 3.3L Limited AWD

Question type: Maintenance & Repair

i've loosen the bottom one behind engine mount , but no room to pull it out, still
can't see top one. picture would be nice. looked on youtube , only shows a 2.7
not a 3.3

41,230

TDolby answered 4 years ago

What are you trying to remove?

Mark helpful

Guru8V4JC answered 4 years ago

oh sorry I thought I mentioned it. the starter

Mark helpful

Your Answer:

do you need any special tools , because access to bolts are not easy , bottom one behind engine mount and can't see the top one 2 Answers

i've loosen the bottom one behind engine mount , but no room to pull it out, still can't see top one. picture would be nice. looked on youtube , only shows a 2.7 not a 3.3

2008 Hyundai Santa Fe 3.3L Limited AWD

-

Maintenance & Repair
Intermittent problem with 2009 Hyundai Sante Fe whereby engine light comes on and I can't go beyond 40 kmh and even less when climbing hills. Both my mechanic and the local Hyundai dealership are not sure (or at least not convinced) it's the the throttle b/c the problem is only intermittent. So far $400 and problem is still there and recurring more frequently. Any ideas? 5 Answers

Intermittent acceleration problem with my Hyundai. Engine light comes on and can't go beyond 40 kmh. Might happen after being parked for a short period (10-20 mins) or as the last two times, while...

2009 Hyundai Santa Fe

-

Maintenance & Repair
If the engine light comes on and the shop runs a gds on the car is possible to get not a single code? 2 Answers

I own a 2007 Santafe 2.2 CRDI, in Portugal. Nine months ago the engine light came on and i took the car to the shop. The car was checked with GDS and according to the owner of the shop no code appea...

2007 Hyundai Santa Fe 3.3L Limited FWD

-

Maintenance & Repair
how to access stabilizer bar bushings on 2004 santa fe 2.7 1 Answer

I'm getting the worn out stabilizer/sway bar bushing clunk. But I can't seem to be able to get to the bushing bracket bolts from the recommended way- through the wheel well. What's the best way to g...

2004 Hyundai Santa Fe GLS FWD

-

Maintenance & Repair
after doing the plugs, Putting the intake back on do you use a torqe wrench an if so wat torqe an also do you tighting bolts back in a pattern 2 Answers

Im working on this Santa fe an was hoping to get this answered

2004 Hyundai Santa Fe GLS FWD

-

Maintenance & Repair

Used Hyundai Tucson

109 Great Deals out of 2,253 listings starting at $2,400

Used Kia Sorento

74 Great Deals out of 2,293 listings starting at $3,977

Used Honda CR-V

107 Great Deals out of 3,879 listings starting at $1,995

Used Toyota RAV4

96 Great Deals out of 2,111 listings starting at $3,888

Used Toyota Highlander

28 Great Deals out of 738 listings starting at $2,495

Used Honda Pilot

45 Great Deals out of 1,231 listings starting at $4,495

Used Ford Explorer

74 Great Deals out of 2,080 listings starting at $2,999

Used Kia Sportage

55 Great Deals out of 1,951 listings starting at $4,400

Used Hyundai Sonata

35 Great Deals out of 1,118 listings starting at $3,995

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

do you need any special tools , because access to bolts are not easy , bottom one behind engine mount and can't see the top one

2 Answers

Your Answer:

Shortcuts

Search Hyundai Santa Fe Questions

CarGurus Experts

Find great deals from top-rated dealers

Related Models For Sale

do you need any special tools , because access to bolts are not easy , bottom one behind engine mount and can't see the top one

2 Answers

Your Answer:

Related Questions