The stability track light keep coming on.

On GM's the stability control and abs sensor are in the hub aka wheel bearing I suggest u go and have ur wheel bearings or hubs replaced that should make ur light go off

service stabiatrak service traction control on my 2008 acadia replaced steering sensor all is good

2011 Acadia traction control light off came out after helping someone with jumping cables

Where is the sensor located

I love onstar i had this same warning lights on onstar gave me the code C0050 this is a wheel sensor problem.

Hi; I have Acadia 2007 , there is a signal of traction service and park assistant is off , coming frequently .It was check by dealer and advice to change the transmission module with in the Gear box !! which cost 1500 $ .Please , if you have any suggestion what to do ? regards

2014 GMC Acadia. Driving down the highway I hit a small bump and my door locks started to open and close and traction control light started to flash. I couldn't drive more then 20 mph because it would start to run rough. Door lock would open and close and the transmission would shift very hard. I drove about 15 miles until I got home nothing more than 20 mph. I have a scanner from HF that would give me codes from my ABS and it said that there was the communication. So I checked all 4 speed sensor with a multimeter and I was getting a reading of 452 to 480 ohms on all 4 sensor. Not sure what was supposed to be the ohms and reading on other blogs that it should read between 1000 And 2000 I order all 4 sensor from Amazon . AC Delco for under 100 bucks. When I receive the new sensor I checked the ohms and their where 460 ohms. So back to the drawing board. I checked the sensor from voltage. As I rotate the wheel I wasn't getting any reading from the rear right sensor. I removed it to find out the it was full of Gunk. At this point I just installed the new one and I was able to get a reading. I installed all 4 connected the battery and took it for a test drive. So for it's back to normal. I drove the truck for 15 miles and was able to get up to 70 MPH with no problem. So I'm hoping this was the issue. Check your speed sensor before going crazy and speeding a ton of money. The sensors are located by your wheel hubs. 4 ac Delco from Amazon under 100 . 112k miles on my Acadia.

do not buy gmc acadia crap

I have had the same issue for some time now. POS GMC Acadia-- STAY AWAY from this shit box. 1. Throttle Body Replaced 2. Brake Sensor Replaced. 3. Vapor Canister Purge Valve Solenoid Replaced. 4. All 4 Wheel Sensors Replaced. 5. Battery Replaced. 6. Plus and Plug Packs Replaced. Result---- Same Service Stabilitrak Error This car has been nothing but a headache since the day I got it. It is not reliable and cannot be trusted for short trips to the store no less a family trip. DONT BUY ONE! VERIFIED GMC Acadia Owner

There are over 10 different issues that can trigger StabiliTrak warning message to come up. Search for "Troubleshooting StabiliTrak Light by youcanic" on Google. It goes over these issues and how to troubleshoot it yourself.

Same issue 2014 Acadia SLT. Replaced the brake pedal position sensor switch $10.10 after tax OEM part - Amazon. 10 minute fix. Just need a screw driver. Solved my issue. Just an electrical issue within the switch. Note to make sure the nipple on the switch goes into it's little hole. Super easy.