whats the firing order for a 2008 Kia Rondo 2.7L engine, I have a missfire on #4
Asked by riverrat44 Mar 30, 2015 at 04:38 PM about the 2008 Kia Rondo LX V6
Question type: Maintenance & Repair
I have a missfire on #4 cylinder, which bank is #1 cylinder and how does the cylinder
order go?
10 Answers
This is Sportage, and Sedona. Both 2.7. I have no reason to think the Rondo would be any different. Can't find one actually labeled Rondo. Will size up
how do i know where the plug wires go on the unlabled coil pack!
Kajunguy36 answered 8 years ago
I have a 2008 Kia rondo with the v6 what's the location of the number 1 cylinder I have a misfire on the number 1
Christopher answered 7 years ago
were on a 2008 kia rondo is cylinder 5 located at
1-3-5 on the back 2-4-6 on the front
I have a question and I haven't been able to find a video or some instructions for my kia rondo 2008. I got a misfire error code p0300 and p0301, so basically that's coil 1 but the problem is that I think coil one is on the back. There's no videos or nothing to show me how to remove the manifold to get to the 3 coils on the back. I did the 3 front coils and spark plugs but the back ones look complicated. Any help
I have a 2008 optima lx v6 2.7. There are the obvious bolts in top of the manifold, and then 3 addition bolts that I had the car raised to get to with a short socket(especially in regards to the middle bolt). I think 12 mm. The hoses and wires you're gonna wanna disconnect will make themselves apparent when the time comes. Took me about 2 hours the SECOND time I took the sucker off and replaced all the coil packs. First time.was plugs alone. Problem persisted, so coils fixed the misfire. Just did them all, and saved myself some money and heartache in the future by doing them all.
Hey dennys I'm having the exact same problem. Dog you ever find the solution or video.
The same here with my 08 Kia Rondo 2.7L. I changed the spark plugs on the front 3 but not sure how to get to the back 3? Any help would be appreciated. Thanks in advance.
Guru9W82HD answered 3 years ago
you must take the intake manifold out to reach the other 3 ignition coils and spark plugs hope i was helpful