Mitsubishi Lancer water in gas
Asked by MsPerri Oct 26, 2018 at 09:26 AM about the 2009 Mitsubishi Lancer ES
Question type: Maintenance & Repair
I have a 09 Mitsubishi lancer 2.4 l motor. I
was told some bad gas was put in it. I
won't start. I cleaned out bad gas put new
gas in and it still won't start. Any
suggestions as to what I need to do to?
6 Answers
It was gas in a gas can that sat out in the rain for at least a week.. so it had lots of water in it..
Yeah so clean gas.. injector cleaner in New gas but doesn't seem to be getting good gas.. can hear fuel pump come in when key is turn to on position... trys to start for a second then like not getting fuel
Okay I remove the fuel pump... Had pressure on the line when I disconnected it... took the old gas out wiped out the tank... Put the fuel pump back in Put new gas in... I can hear the fuel pump when I turn the key to on but it's acting like its starving for fuel... Is there a way to see if the fuel is getting to the injectors... Please help
If they were bad would it run if sprayed starter fluid in intake?
Hey thanks for your help! Lol.. drained fuel line and rail and put it back together and she runs just fine
