VRoom12345 answered 2 years ago
Maybe you forgot to replug in an electrical connection after you completed the alternator work? Transmissions are electronically controlled or maybe just a coincidence too.
Did you use the memory saver tool before disconnecting the battery to replace the alternator?
Why wnt it change gears
2009 Chevrolet Cobalt 2LT Coupe FWD
-
Maintenance & Repair
disconnected negative side of battery before dropping tank to replace fuel pump. There was only one procedure to insert float arm to fuel pump. replug all connections and reinstall tank. fuel pump w...
2006 Chevrolet Cobalt LS Sedan FWD
-
Maintenance & Repair
I took my 06 chevy cobalt 2.2 L to have the clutch replaced .before it ran smooth. Now it idles really rough and misfires . The clutch itself is smooth and no noticing noises from it . Allet light...
2006 Chevrolet Cobalt LT Sedan FWD
-
Maintenance & Repair
Our 2008 Cobalt has the ignition switch and cylinder recall and the dealer replaced the part. The invoice shows the part number for the ignition lock cylinder only, not the switch. Shouldn't there b...
2008 Chevrolet Cobalt
-
Maintenance & Repair
Had a transmission mount broken on my 07 chevy cobalt and after replacing it the hard shocks went away but now the car still jerks when changing gears and when changing to drive or reverse. Could ...
2007 Chevrolet Cobalt LT Sedan FWD
-
Maintenance & Repair
CarGurus has 23 nationwide Cobalt listings starting at $1,999.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.