when even we buy fuel the car will not start once and check engine light come on and when we diagonise it it was telling us valve pressure regulator
please i don't know what to do again and if there is any help i need just scanner machine
santapaws1 answered 12 years ago
first check to see if the fuel pump is coming on have someone turn the key on while your near the gas tank you should hear the pump turn on when they turn the key. if it dosen't check the fuse for the fuel pump next. this will tell you if it's the regulator or the pump or the fuse
please i don't know what to do again and if there is any help i need just scanner machine
2009 Chevrolet Malibu 1LT FWD
-
Maintenance & Repair
Replaced the crank sensor and were still not getting a pulse from fuel injectors and it won't start gas will come out fuel injectors so we know those are good we know we have spark please help Br...
1997 Chevrolet Malibu LS Sedan FWD
-
Maintenance & Repair
the code was PO102 MAF or VaF circuit low
1997 Chevrolet Malibu LS Sedan FWD
-
Maintenance & Repair
My car needed to be jumped to start then when i came out of work it started but the engine light and traction light were on. There was no real power when I stepped on the gas peddal . I did drive it...
2010 Chevrolet Malibu 1LT FWD
-
Maintenance & Repair
The check engine light came on-couldn't get it to clear off. Took it too have the codes cleared, they couldn't do it. After several tries it will just go off but then it comes back on again. Hours hav...
2006 Chevrolet Malibu LS FWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.