no sound from new aftermarket stereo
I went and bought the wiring to put aftermarket stereo in my 2009 ram 1500 sport when hooked the aftermarket stereo there is no sound
Asked by Diablo2017 Sep 17, 2019 at 11:50 AM about the 2009 Dodge RAM 1500 Sport Crew Cab RWD
Question type: General
I went and bought the wiring to put aftermarket stereo in my 2009 ram 1500 sport when hooked the aftermarket stereo there is no sound
beatupchevy answered 5 years ago
you may need an interface to deal with the computer , the computer runs everything in newer cars , the days of red wire black wire are over
I went and bought the wiring to put aftermarket stereo in my 2009 ram 1500 sport when hooked the aftermarket stereo there is no sound
2009 Dodge RAM 1500 Sport Crew Cab RWD
-
General
radio is on I can put it on a station and it shows its on put in a c.d. and I can see it counting and playing but no sound the fuse under the hood for radio amp is good I changed it to be sure plz hel...
2002 Dodge RAM 1500 SLT LB 4WD
-
General
I replaced the factory radio. with a Sony XAV-AX5000 I did not cut any factory wires on my 2012 ram 1500 quad cab 4.7l. Radio worked perfect after the install. All the wires on the wiring harness we...
Dodge RAM 1500
-
General
replaced plugs crank sensor checked relays fuel pump has weak intermittent fire from coil wire
Dodge RAM 1500
-
General
My blinkers flash fast and lamp out light is on also no head or tail lights
2003 Dodge RAM 1500 ST 4WD
-
General
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.