we changed engine in 2010 equinox and want start we have no fire to plugs

we changed engine in 2010 equinox and want start we have no fire to plugs 4 Answers

have a 2013 Equinox tl we have no crank no click but everything comes on 1 Answer

we have a 2013 Equinox we put a new battery and a new starter but still no turn or crank and on click. But everything in the dash comes on as Normore.So what could be the problem.

I have a 2008 chevy equinox and i really love it, but i cannot get to the engine light problem. I already had it tune up changing all wires and spark plugs, two sensor and a the coil. i keep up with the maintanance of the vehicle. the problem im having is that when we use the remote started, the engine light come on. can you help me and give me some kind of solution, please 4 Answers

engine light comes on when remote started is use. what could be the problem? ,

2008 Chevrolet Equinox - Still Sputtering AFTER replacing spark plugs & wires. I have read posts regarding a known issue with this engine and want to know how to get this fixed and have it last a while. 1 Answer

Changed plugs and wires at 70K and 103K miles (last week of December, about a week ago). Air filter is good, throttle body is clean, MAP sensor is clean...What else is there?

2007 chevy equinox LT AWD overheats at idle, idle is dropping to below 1000 rpms, can put in neutral and get rpms up to 1500 or more and problem goes away, when it does overheat it also says to check engine oil, i have replaced thermostat and flushed radiator, and changed the oil. anyone have any ideas, thinking it is electrical short, or something like that, when on highway i have no problems. 3 Answers

idle is dropping to below 1000 rpms, can put in neutral and get rpms up to 1500 or more and problem goes away, when it does overheat it also says to check engine oil, i have replaced thermostat and ...