Asked by Mickalo Aug 20, 2016 at 07:16 AM about the 2010 Ford Explorer XLT 4WD
Question type: Maintenance & Repair
I need to replace the bulbs behind the speedometer that illuminates the
speedometer/fuel gauge display. Not having repair manual for this vehicle
was hoping to get some quick instructions how to access to replace these
bulbs.
Vehicle 2010 ford explorer xlt 4wd
Thank you
http://www.explorerforum.com/forums/index.php?threads/insturment-panel-light.317321/ - don't unplug any modules to the IC or you may have trouble with the passive anti-theft system. Once you have it loosened just lean it forward to get to the bulbs. I had an Expedition and followed largely the same procedures.
I need to replace the bulbs behind the speedometer that illuminates the speedometer/fuel gauge display. Not having repair manual for this vehicle was hoping to get some quick instructions how to acc...
2010 Ford Explorer XLT 4WD
-
Maintenance & Repair
need diagram for fuse panel
2002 Ford Explorer
-
Maintenance & Repair
I first noticed that my windows would not work. They don't work with the driver or passenger panel but. The window lock and door locks do not work on driver panel but the door lock works on the pa...
2002 Ford Explorer XLT
-
Maintenance & Repair
owner manual says it is located below the drivers instrument panel? took the screws loose from the bottom panel.....No fuse block
2006 Ford Explorer XLT V6 4WD
-
Maintenance & Repair
I need to remove plastic rivets on rear interier vinal panel
2001 Ford Explorer
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.