how can I fix the Fan blower in my Honda CRV 2010
Hi, My Honda CR-V 2010 fan blower is not blowing on the front middle vent. It
only blows air by the windshield and on each corner of the dashboard. I set the
mode to Front Fan ONLY.
Please see attached photos for more illustration.
So the mode servo or door has a problem, have your favorite shop do a HVAC code check to locate the problem. This can be an expensive repair so brace yourself.
I don't think No Car, No Honda Climate Control System has that option shown in the picture. Make sure (before attempting any repair on your HONDA HVAC Blower) that Air Delivery Mode Control in your Vehicle Climate Control System Unit is on the right set or position: 1) Air will flow from the center and corner vents in the dashboard. 2) Airflow is divided between the vents in the dashboard and the floor vents. 3) Air flows from the floor vents. 4) Airflow is divided between the floor vents and defroster vents at the base of the windshield. 5) Air flows from the defroster vents at the base of the windshield. Thanks.
i'm not really sure what you meant of "no car with that option on VCC". I have attached a new photo if that's what you called VCC. I selected the font fan only but its not blowing air from the center vents. only blowing from the corner corner dashboard and at the base of the windshield. It appears to be something is blocking the airway in the center vents.
what I meant was that No Car Blows Cooled or Heated Air from defroster vents at the base of the windshield and from the center and corner vents in the dashboard at same time. can't have Air flowing both way same time. "It appears to be something is blocking the airway in the center vents" you just said...., Then Check: Vacuum Control Motor-Center vent door mode/Linkage may be defective, broken, binding or obstructed. sorry for the mis-understanding and thanks.
