woreoutolddude answered 9 years ago
check for vacuum leaks look at the vacuum lines and make sure they all are installed properly and well seated. usually when you get a too lean bank 1 or bank 2 code it is a vacuum leak not always but usually
This must be a continuation of a previous question..or you truly are a Master Guru, woreoutolddude!
2010 Hyundai Accent GLS Sedan FWD
-
Maintenance & Repair
I have a 2008 Hyundai Accent with the check engine light on. It comes up to code 2096 (post catalytic converter fuel mixture too lean.) I have tried everything myself and my mechanic can think of: ...
2008 Hyundai Accent GL 2-Door Hatchback FWD
-
Maintenance & Repair
I want to stop paying on it because I'm not putting another dime in this vehicle. Someone told me that when it gets condensation under the hood it causes the plugs to go out. What should I do?
2009 Hyundai Accent
-
Maintenance & Repair
My car is having rough idles, and I have to press the accelerator in order to get the car to start and if i let go of the gas pedal too soon it will turn off. The RPMS are below whats normal. I repl...
2009 Hyundai Accent GL Sedan FWD
-
Maintenance & Repair
So, drove 07 hyundai accent for an hour. Was running errands locally at a store at night. From store parking lot, the car did not start. Battery was fine, it was cranking alright, but did not start....
2007 Hyundai Accent GLS Sedan FWD
-
Maintenance & Repair
CarGurus has 435 nationwide Accent listings starting at $1,990.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.