Can Someone Please Help Me Diagnose the problem I'm having with my 2011 Chevy Impala
Asked by TRICIA2011 Nov 16, 2017 at 10:45 PM about the 2011 Chevrolet Impala LT FWD
Question type: Maintenance & Repair
The noise happens mainly when I press the gas
pedal after stopping. It makes the noise and the
car seems as if it doesn't want to move much. The
noise is like what you hear when you run over
those "rumble strips" on the sides of the road. TH
8 Answers
Does is get smoother as speed increases and you ease off the gas pedal? How well does the car coast if you pop it in neutral?
TRICIA2011 answered 6 years ago
Have never put it in neutral. And, yes it does ease off as my speed increases.
TRICIA2011 answered 6 years ago
Chevy Impala 2011 3.5L V6 Throttle Body Failure If you watch the YouTube video I just mentioned before this sentence, that is what my car sounds like, but, it doesn't make the sound quite as often - just intermittently, and, mostly when I have been up in speeds in excess of 45 MPH for a good bit of time.
TRICIA2011 answered 6 years ago
-Chevy Impala 2011 3.5L V6 Throttle Body Failure- that is the video on YouTube.
TRICIA2011 answered 6 years ago
Meant to mention how now it sometimes makes the noise and feels like it wants to try and stop when I am just driving along. Those times are not as often as when I stop and press the gas pedal, though.
TRICIA2011 answered 6 years ago
Also, my check-engine light does not come on, and, when the dealership ran diagnostics on I'm car, they didn't get any code to come up as being wrong with! It.
That sounds like an ignition related misfire, I would start by changing the spark plugs and spark plug wires if they have not been changed recently as they are "consumable" items that should be replaced around every 100,000 kms. I I problem persists I would move onto replacing the ignition coil a it I will component that wears also. If still no change I would have a compression and leakdown test done before replacing t throttle body,bad/burnt valves can cause a misfire and rarely throw codes