why wont my tire pressure light go off even though pressure is fine
Asked by skygrace2014 Feb 03, 2015 at 12:15 AM about the 2011 Chevrolet Malibu LS FWD
Question type: Maintenance & Repair
My 2011 Chevrolet Malibu's tire pressure light will not go off. I took to tire shop to make sure everything was fine and all 4 tires had proper pressure. How to I reset my sensor.
23 Answers
Sensor light should be off if the tires are all properly inflated. Perhaps you have a defective sensor. Take it to the dealership and get it checked.
mikeatpriestlake answered 9 years ago
tire pressure sensors are in the wheel, prices start around 40 bucks.
You can reset the tire pressure monitor by pressing the unlock and lock on your keys for abut five seconds while your car is set to on but the engine isn't running. Then you add or take away are in the front left tire until the car horn beeps. Move to the front right tire and do the same thing until the horn beeps. Then to the right rear and lastly the left rear. All will beep when the car has recognized the tires pressure sensor. if done correctly the horn will beep twice on the last tire letting you know you have reset the monitor
How you turn off service traction button
There's a button appears to have a red triangle inside of another... push that button for your traction on traction off
Sexigemini40 answered 7 years ago
My rear tire on my 08 malibu was cut in a perfect circle on the inside twice but nothing is sticking out and it doesnt cut my spare tire Does anybody know why this is happening?
I just called local Chevrolet dealer about my wife's 2013 Malibu. They said $185.00 to replace sensor. Tire shop where we get our tires said they could do it for $80.00.
mikeatpriestlake answered 7 years ago
How much would you rather pay? Ask if the tire shop work has a warranty. Our local Les Schwab does it and they warranty everything.
My tire sensors on my 2010 Malibu keeps coming on at least twice a week. The ignition light keep flashing at times also. Most recently the steering wheel stiffed up on me while driving. I had to get the steering wheeling repair along with the ignition light several times and it keeps coming back on. This have been my fourth chevy purchase in 8 years and they all have ignition lights flashing after awhile and I never get any result or help from the dealer Bob Bell in Bel air MD. They give us some warranty story each time for each cars/trucks.
The local tire store reset the sensor and haven't had anymore problems with 2013 Malibu.
I have a 2011 Chevy Malibu LT the key fob stopped working also the tire pressure light is on and when I check the tire pressures there all blank, could this be a bad keyless remote receiver, if so we're is it located I can't find it on line or in any Manuel, I called Chevy service and they even did not know its location. Please help if you can. Thank you.
I would never buy another chevy Malibu they are nothing but problems worst car I ever had
@marisa, pretty sure the button the has the double triangle is the emergency 4 way flasher button. LOL!!
Lightdrive1975 answered 5 years ago
How do I reset a 2009 chevy Malibu's LT service tire monitor?
My Tire Pressure Button doesn't appear to work. What does it do anyway?
i have a 2009 chevy malibu ignition light always comes on then goes off and the psi light has been on and won’t go off for a month or so yet all tires are to the proper limit however the sensor is displaying two of my tires are at 0 ?? how’s that even possible ?? so i attempted to reset the svc tire monitor cuz suddenly this newly joined sign apparently wanted to join in on the bothersome persistent issue ive had going on here already for quite some time smh and after attempting to reset it now my air bag light wanted to come in which by the way the air suddenly has been popping up coming on and the food and this too is another new one dnt knw where or why the heck he’s even involved but after i attempted at resetting the svc tire monitor doing exactly step by step getting same result as expected except that at the end now my psi numbers are just all dashes and will no longer display with the tire pressure is so just like most of u i have now encouraged there’s the same or similar issue and i’m just lost for words i d t knw what to do next
am i not asking right i have a 2012 chevy malibu i am trying to turn off the SVC light but i dont have a key fob i have seen they do it on a cruze and a truck but i am having a hard time doing it on my malibu can someon talk me through this. please and thank you
We are having the same issue with our daughters 2012 Malibu. We don’t have a key fob to reset the abc tire monitor. Please need answers.
Disconnect the positive side on your battery for about 2mins.. and reconnect it.. this should reset it..
You can buy a after market key fob at auto stores, i paid 25, the dealership wanted 50.
What is this symbol mean can somebody help me?
If dashed lines,at tore pressure..means NOT READING the particular sensor....in YOUR case......BOTH SHOWN
bfast54..... my 2012 Malibu shows dash lines on all 4 tires. Just started like that today. Any way to get the censors to read the pressure?