Gas gauge goes in and out
The gas gauge stops working when I erase the code it starts working. The
code is P2066. I have changed the main fuel pump.
Guru9LR7Y6 answered 3 years ago
Most likely your sensors. There's an a and b sensor to make sure the resistance is at the right spec.
The gas gauge stops working when I erase the code it starts working. The code is P2066. I have changed the main fuel pump.
2011 Chevrolet Suburban 2500 LS RWD
-
Maintenance & Repair
I just bought a 1996 suburban 5.7 i had no idea it had rhus problem.its getting like 8 miles per gallon.i changed oil and found gas in oil.also black smoke from exhaust .also wants to stall when u ...
1996 Chevrolet Suburban K1500 4WD
-
Maintenance & Repair
ran out of gas and refueled, and wont start now. engine does'nt turn just one click sound gauges dont work radio dont work, but lights and alarm etc do work
2003 Chevrolet Suburban 1500 LT RWD
-
Maintenance & Repair
Filled up with diesel instead of gas, after draining tank and filling with gas,all dash lights flicker off and on even to stabile track and four wheel drive.
2003 Chevrolet Suburban
-
Maintenance & Repair
I have a 1996 suburban with an issue that need help with. My truck idle find revs up find only when you put it in gear and want to go it wants to die you let off the paddle and it fin you step on th...
1996 Chevrolet Suburban C1500 RWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.