No crank Chrysler 300
Asked by Guru3Z78M Jun 28, 2020 at 10:22 PM about the 2006 Chrysler 300 Touring RWD
Question type: Maintenance & Repair
I have a 06 Chrysler 300 touring
I went to crank it but got no crank or start
just a click in the rear fuse box but I have
power up front yet it will not engage the
starter. The battery is fine I have checked all
the fuses an they are good.
9 Answers
Yes. Also I've checked all the fuses an checked make sure that they have power.
I'm having the same issue with my 2012 300. Did you get it fixed? If so what was the problem?
If u have remote start, there is a switch by the hood latch that prevents the car from being started with the remote. U can unplug it and see if the car will start. If not put a jumper wire in the connector. What we are trying to do is to make the car think the hood is closed.
Found out wiring issue the stater solenoid looks bad so going to put a sw-3 starter solenoid in at least it's only $10 I hope that fixes the problem . I will let you all know if this works