WHAT DO I NEED TO DO TO REPLACE SPARK PLUGS 3.5L 2006 300 TOURING
Asked by beaver1966 Sep 13, 2012 at 08:20 PM about the 2006 Chrysler 300 Touring RWD
Question type: Maintenance & Repair
3 Answers
1. Get the tools needed to screw the plugs out 2. open hood 3. unplug the wires attached to the sparkplugs. 4. Unsrew them and take them out 5. put new ones in 6. replug the wires 7. turn on car 8. close hood hope this helps just remember to turn the car fully off before you start and then take the positive wire off the battery
2 people found this helpful.
and remember to always check the gap in the new plugs. they are usually close but not always perfect