My 2011 dodge grand caravan front turn signals would take flash. Only the rear signals flash.. also when using the hazards of ly the rear flash. All the light turn on but,only the front turn signals

You may want to check the relays for the signals or a short...

Do you know where the relays are located?

Hi aero_1357 were ever able to resolve the light signal issue? I'm having the same problem. Any advice?

No not yet. I started to have this problem when I changed the TIPM because of the fuel relay problem. When I put the new TIPM in that is when I had the problem. The front signals would not Flash only the rear. Same thing when you use the hazards. Only the rear would flash. When they Flash they would start flashing fast like the bulbs are blown. So I put back the old TIPM back in and the flashers hand signals work okay, but I needed the new TIPM back in so the car would start. The next thing I'm going to do is to see if the TIPM need to be reflashed.

Same here started o have the problem when I replaced the power module/fuse box. I guess I gotta take it to the dealership. Last resort. Thanks for the response good to know I wasn't the only one. Thought I was loosing it for a sec.

No problem. It is good to know that your not loosing it. Let me know how it works out. I'll let you know too.

Anyone get this resolved? I’m having same problem now. What was diagnosis?

THIS IS RESOLVED: Easy fix. Please email me at sundance@astound.net and I will forward copy of detailed fix.

Need help 2011 dodge grand caravan no front turn siglas or hazard

Did any of you get this fixed or any one email the guy who said easy fix

The problem ended up being the Totally Integrated Power Module (TIPM). I brought back the TIPM I bought to replace the first one. Then I put the 2nd new replacement TIPM in. Once I did that everything was good. The van started and all the flashers worked.

2012 dodge grand caravan turning signal relay location