I have a 2904 chrysler pacifica it crank but will not start I've changed the spark plugs i also changed tge crank sensor and it doing the same thing I've even did the code test and no code shows up

I have a 2904 chrysler pacifica it crank but will not start I've changed the spark plugs i also changed tge crank sensor and it doing the same thing I've even did the code test and no code shows up 2 Answers

Changed air filter on 2005 Chrysler Pacifica and now I have high rpms before it shifts gears 2 Answers

Never had shifting issues prior to changing air filter, and now since I did, my car doesn't want to shift until around 3000rpms. I checked all connections and everything is hooked up fine.. I even...

2006 Chrysler Pacifica dies while driving and won't start back up 3 Answers

my 2006 Chrysler Pacifica Touring dies while I am driving and it won't start back up I have changed the spark plugs the water pump still comes on or the gas pump which of the one that is it sounds ...

I have a 2004 Chrysler Pacifica and have a code of po440 is their any common problems 1 Answer

I have checked the gas cap and it seems to be OK. I have also checked for vacuum hoses being off or loose cant find any problem's their. where can I look.

I have a 2007 Chrysler Pacifica limited awd and when I drive between 30 to 40 mph it starts to vibrate. I don't know if its the drive shaft rear or the u-joints. I am confused and don't know what to do. It drives prefectly and want to know if I can still drive it. 4 Answers

it vibrates when I go between 30 to 40 mph. I don't know if its the drive shaft rear, or the u-joints. It does not make any noise just vibrates.