How do I replace the tail light lens on a 2004 Chrysler Sebring convertible
2 Answers
The lens is integral to the assembly. The entire reflector housing with lens must be replaced.
1 people found this helpful.
1 To remove this housing, unscrew the retainer nuts behind the assembly inside the trunk. (These may be concealed under carpet). 2 Disconnect the cable. (There is a locking device that slides). 3 Wiggle the assembly, pulling it free of the car. 4 Twist sockets to remove. 5 Reverse process to install new assembly.
4 people found this helpful.