Engine swap in a 2000 Sebring JXi convertible

I dont know about another engine that'll bolt up, but I've always wanted to see a 318 v8 stuffed into one. I've seen it done on an intrepid with minimal work but not sure about a sebring. In my opinion metal fab is easer than trying to swap an engine and ecu from another car. Carburated 318,with an auto and a 8 3/4 rear if I was doing it.

That sounds pretty reasonable, this is the 5.2L one produced a while back, correct? If so, any idea where i might be able to look online to find one?

Chrysler has used the 318 in cars and trucks since the late 60's go to a junkyard and find a 2wd truck or an older RWD Dodge,Chrysler, or Plymouth. The intrepid I saw used a junkyard 318 and automatic, they welded tabs onto the rear end and bolted it right to the original rear suspension components. here's a link to the video, maybe it will give you some inspiration. http://www.youtube.com/watch?v=yfNhPeye4jk&feature=related and heres another one. http://www.youtube.com/watch?v=vwKBLiKOcnk&feature=related

http://www.autoelf.com/shop/motor/chryslerbestaemop_318rlb.html Something along the lines of this, correct? RWD on a sebring seems like a challenge but if all goes well, the rewards should out weigh the risks

Its definitely a risk, and I wouldn't do it unless the current engine blew up. For the 1300 that engine costs you could buy an entire parts vehicle and have an engine transmission and rear end. If it were me I would make it work with a cheap junkyard engine first then after all the bugs are worked out I would dump in a nicely rebuilt engine. There's no sense dumping large sums of money into an experiment.

I was just using that for a reference haha. But ill definelty look into something at one of the autoyards around here, thanks for the help!

if you want more hp out of your car put a LXI engine in it.

Actually try asking mitsu tuning dealers in japan my 2,5L V6 l is producing 306 Hp, costet me 4560 dollars, 5 years ago. Took 8 hours off work, used evo tech parts, try that:)+ if i op for the Turbo step 2 it would produce in the 505 hp+ range. Thats on my 1995 Sebring coupe. I love it.

Or just go for millitech,(PTEF) oil additive, reduces friction should give you about 10% and a open cone filter (cold air intake + 5 % extra so thats 15 % extra, then give the car titanium tipped spark plugs. that should give u a extra 4 % SO THATS ABOUT 31 hP MORE,+ put the miltech in your gearbox(trany) another 10 Hp =41 Hp. Greatings from Iceland, Reykjavik. Total cost about 300 Dollars + 15 % better fuel millage

3.0 from mitsu galant is a plug and play use all 2.5 stuff on 3.0

What year galant 3.0 is a plug an run swap. Tommcmanis?