I have a question that I need to get an answer: I have a 1999 Chrysler 300M and the dome light comes on all by itself and kills my battery. I replaced the battery and it did it again. A mechanic told me that when you replace the battery on this car, you need to get it reprogrammed. Is this correct or is he just trying to con me out of $165. Is this correct?

I have a question that I need to get an answer: I have a 1999 Chrysler 300M and the dome light comes on all by itself and kills my battery. I replaced the battery and it did it again. A mechanic told me that when you replace the battery on this car, you need to get it reprogrammed. Is this correct or is he just trying to con me out of $165. Is this correct? 2 Answers

All power is lost when I get in the car to turn it on. I opened the door and all the lights come on, you know the dash and interior lights but it will not start. 1 Answer

I my car has done this before lately and it started right up. What could be causing this? I replaced the Battery, The battery post cables both positive and negative. I thought it was the CAM shaft o...

My Chrysler 300M airconditioning stopped working. The blower system is still working and I am thinking that a relay or fuse blew somewhere in the system so that the condensor clutch is not engaging. Has this symptom been common? 2 Answers

My Chrysler 300M airconditioning stopped working. The blower system is still working and I am thinking that a relay or fuse blew somewhere in the system so that the condensor clutch is not engaging. H...

2000 300M. Shut car off to run inside 3 mins came out & won't start or crank. Everything power works fine but hit the key & don't make a sound. Please help I'm DIY & this car is all me& girls have 3 Answers

I shut the car off to run inside for maybe 3 mins came out and everything electric/power works except when I turn the key it don't make a sound. 138K miles & its a 2000 300M. Couple wks before it ...

I need help setting the timing, adjusting the rocker arms and setting them they are hydraulic and I have a question about what the metal shavings could be from that where by the rockers the right head 5 Answers

Reason for work: knocking on the right side top end facing the motor. what I did: I took off the valve cover on the right side and noticed there was some big thin metal shavings by the rocker arms...