My 06 dodge durango 5.7 hemi shows the check engine symbol on the dash as well as the symbol for electronic throttle control code, is there a method for me to clear the electronic throttle control code as this causes the car to run badly and the manual recommends it not be driven like this.

My 06 dodge durango 5.7 hemi shows the check engine symbol on the dash as well as the symbol for electronic throttle control code, is there a method for me to clear the electronic throttle control code as this causes the car to run badly and the manual recommends it not be driven like this. 3 Answers

I have a 2004 Dodge Durango. While driving, I lost all power to the wheels, yet all electrical and engine seemed to be operating. Pulled over, and it would not move , regardless of what gear I put it in ( N, R, D, 1, 2 ) My first guess is the transmission went out, but could there be a sensor or other cause for this. When I accelerate, I hear the engine, but still have no movement in any gear. 8 Answers

I have a 2004 Dodge Durango. While driving, I lost all power to the wheels, yet all electrical and engine seemed to be operating. Pulled over, and it would not move , regardless of what gear I put ...

Do I have to rebuild my engine if codes P0300, P0113, U0121, and I think code P0131 shows on my 2007 dodge durano 5.7 hemi engine and what is the cheapest price? 1 Answer

I have a 2007 Dode Durange 5.7 hemi. My truck was working fine until I drop my child off to school. I try to start it. It wouldn't start. Now I was so stress that I didn't put any oil or coolant in ...

I have a '98 Dodge Durango that sounds like it is running out of gas. It spits and sputters and dies. Pushing in the gas pedal to rev the engine does not help. Durango eventually dies. I have had the fuel pump replaced and am leaning now towards maybe the throttle sensor or even the computer module. Any thoughts? 5 Answers

I have a '98 Dodge Durango that sounds like it is running out of gas. It spits and sputters and dies. Pushing in the gas pedal to rev the engine does not help. Durango eventually dies. I have had th...

My durango is haveing a tough time getting started. any ideas as to what it could be. AZ told me that the crank sensor was and the timing chain wasn't timed right, but I just fixed both? any ideas? 2 Answers

hello all, I just got my durango back from the mechaninc that fixed the timing for me. Every since then I've been having troubles gettng my truck started. So I took it to AZ and they pulled five codes...