Asked by RVG_Odyssey Nov 19, 2013 at 03:47 AM about the 2005 Honda Odyssey EX-L FWD with DVD
Question type: Maintenance & Repair
Just replaced my control arms and tie rod ends on the front end, still have a rattle/clunk when hitting bumps, any ideas?
Just replaced my control arms and tie rod ends on the front end, still have a rattle/clunk when hitting bumps, any ideas?
2005 Honda Odyssey EX-L FWD with DVD
-
Maintenance & Repair
I have a 2008 Honda Odyssey that has 198,000 miles on it and runs great. Timing belt was just changed on it at 195,000 miles. When it was taken in to get an oil change my mechanic said the stabili...
2008 Honda Odyssey EX-L FWD with DVD and Navigation
-
Maintenance & Repair
Our Odyssey seems to "wobble" when we first take off, but then smooths out as we pick up speed. I thought it might need an alignment but was told could be drive train - any insight? It's due for the 1...
2001 Honda Odyssey EX FWD
-
Maintenance & Repair
Had a service tech hoist up my odyssey to see what the rattle was - the sound is what you hear when oil is not in engine- knocking / rattling. He wanted to take of a cover but it would be a huge proj...
2008 Honda Odyssey EX FWD
-
Maintenance & Repair
I replaced the front struts on my 2002 Honda Odyssey and immediately afterward when driving home, the steering wheel was no longer orientated properly. I had to turn the steering wheel to the 1 or 2...
2002 Honda Odyssey LX FWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.