2013 ford taurus with intermittant steering issues.
2013 ford taurus with intermittent steering issues. gets harder when turning at
10 and 2. Could it be steering shaft joint assb? Or Steering knuckle?
Thanks Ken
CITYLIFE404 answered 7 years ago
If it's getting hard in one spot then it's very possible it's in the u joint at the bottom of the steering shaft
2013 ford taurus with intermittent steering issues. gets harder when turning at 10 and 2. Could it be steering shaft joint assb? Or Steering knuckle? Thanks Ken
2013 Ford Taurus SEL AWD
-
Maintenance & Repair
What would cause a 2013 Ford Taurus to suddenly loose the brakes without warning. It felt like metal against slick glass and no scrubbing noise. Barley got stopped before hitting traffic. An excl...
Ford Taurus
-
Maintenance & Repair
I recently bought a 99 ford Taurus with the knowledge that there was a power steering problem. I replaced the steering pump and the power steering pulley. Recently while driving the steering wheel...
1999 Ford Taurus SE
-
Maintenance & Repair
I needed some parts replaced on my 2013 Ford Taurus, so the mechanic removed the motor to replace the parts. He has put the motor back in, but now it won't start. Won't turn over, won't click, no ...
2013 Ford Taurus SEL
-
Maintenance & Repair
I have a 2013 Ford Taurus LX, I put antifreeze in the reservoir and it overheats now as I drive all the fluid comes out of it and it's getting still overheating. this is after accident where the fuel ...
2013 Ford Taurus
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.