i have a stick on the floor of my durango 2000 and tried to put into 4 hi and it just slides back and forth now instead of having tention like usual what happened
the stick to use for my 4x4 just slides back and forth now instead of having tention
The linkage must have come loose or broke, you need to get under your truck to see what is going on or have somone who knowes what he is doing take a look. When moving the stick you have to make sure that there is no tension in the t-case secially whenn going from low to high or 4wd high to 2wd. It is best to have the tranny in neutral when you do that to prevent the linkage to brake or come loose.
the stick to use for my 4x4 just slides back and forth now instead of having tention
2000 Dodge Durango SLT 4WD
-
Maintenance & Repair
I have a 2004 Dodge Durango. While driving, I lost all power to the wheels, yet all electrical and engine seemed to be operating. Pulled over, and it would not move , regardless of what gear I put ...
2004 Dodge Durango Limited RWD
-
Maintenance & Repair
truck is acting like its in neutral in any gear i put it in. Check engine light is on
1999 Dodge Durango
-
Maintenance & Repair
I have a '98 Dodge Durango that sounds like it is running out of gas. It spits and sputters and dies. Pushing in the gas pedal to rev the engine does not help. Durango eventually dies. I have had th...
1998 Dodge Durango SLT 4WD
-
Maintenance & Repair
My 2000 Durango will not start without jumping and Has a problem staying running. Just had transmission rebuilt. Now having problems starting and the A/C doesn't blow cold anymore.
2000 Dodge Durango SLT RWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.