POST BY
DavidH25
6 years ago
Best Answer
Enter your vehicle with your key.
Consider using a timer or reliable
watch for the following steps. If
you use a timer, program it for 10
minutes, 30 seconds. Insert the
Dodge Dakota key and turn it to
the "On" position. Start your timer.
Turn the key back to the "Off"
position when the time elapses.
This must be done within 45
seconds of the timer going off. If
you are using a timer, reprogram it
for an additional 10 minutes and
30 seconds. Start the timer again
and turn the key to the "On"
position. When the countdown is
finished, turn the key to the "Off"
position within 45 seconds of the
time elapsing. Program any
additional keys by putting a
programmed key in the ignition
and turning it to the "On" position
for five seconds. Return it to the
"Off" position and remove it from
the ignition. Place the additional
blank key in the ignition and turn it
to the "On" positions for five
seconds, and then to the "Off"
position. Turn it once more to the
"On" position and it will be
programmed to start your car. If
Your Key Won't Program Contact a
reliable automotive locksmith.
This is best done through a
professional organization such as
the Associated Locksmiths of
America. Bring the key to the
automotive locksmith. Remember
that there is frequently a
substantial discount for every
additional key you would like to
have programmed after the initial
key. This is typically not the case
with the dealership. Test your key
in your ignition. If it does not work,
then the key needs to be
reprogrammed. An automotive
locksmith should do this for free
until you have the right encoding
for your key.
