I am putting a new muffler on a 96 Dodge Dakota but there is a sensor Right about to the old muffler at the inlet does this sensor need to be there? Or can I cut it out so I can get a ext.pipe on

I am putting a new muffler on a 96 Dodge Dakota but there is a sensor Right about to the old muffler at the inlet does this sensor need to be there? Or can I cut it out so I can get a ext.pipe on 1 Answer

I have a 2001dodge Dakota with a bad motor I purchase a2003 4.7 motor out of a dodge Dakota I need to know if it a difference and if it fits or is the same to swap it? 4 Answers

I made the swap but still not running

does a new alternator need to be flashed or can I just install and be done 3 Answers

I just bought this truck and they just installed a new alternator but then pcm burnt out with the asd pin still stuck in one of the grey connectors . should I just replace the wiring harness going to ...

I have a 1996 Dodge Dakota with the 3.9 at speeds of 55 to 65 the rpm are running at 3400 some times up to 3800. Is this to high or is it ok. When I back off the gas it slows down fast like I have the bracks on or something. 1 Answer

Is this a transmission problem.

how can i telll how many gallon tank my 2004 dodge dakota 3.7 is so i can order a new fuel pump 3 Answers

3.7 2WD 2004 Dodge Dakota SLT automatic ...how many gallons is my fuel tank I cant find out I need to order a new fuel pump ...