I have a 1986 Ford Bronco 2 4x4 Eddie Bauer. After I get past 45 mph & press the gas pedal it stalls & can't go any faster (like it's in neutral) & then once it gets back down to about 35mph I can go again, but only back up to 45mph & then the same thing happens.What's the problem?Thx

Asked by dpino Apr 13, 2014 at 09:51 PM about the 1986 Ford Bronco II Eddie Bauer 4WD

Question type: Maintenance & Repair

1986 Ford Bronco 2
4x4 Eddie Bauer
*Please see above question*
Thx

40,145

James answered 10 years ago

high range band slipping in trans.

Mark helpful

dpino answered 10 years ago

Hi 7jimmy7, thx. Do I need to take out the trans? & if I do how can I fix the high band slipping? & what parts do I need? Thx

Mark helpful

58,575

Tracy answered 10 years ago

You need to pull the trans. Unless you know how to rebuild an automatic transmission, the guys in the tranny shop will tell you what it needs. Consider a remanufactured transmission. Ford sells theirs for around $1800 with a 3 year/unlimited mile warranty. It's about the same price as having it rebuilt only with a great warranty.

Mark helpful

Your Answer:

I have a 1986 Ford Bronco 2 4x4 Eddie Bauer. After I get past 45 mph & press the gas pedal it stalls & can't go any faster (like it's in neutral) & then once it gets back down to about 35mph I can go again, but only back up to 45mph & then the same thing happens.What's the problem?Thx 3 Answers

1986 Ford Bronco 2 4x4 Eddie Bauer *Please see above question* Thx

1986 Ford Bronco II Eddie Bauer 4WD

-

Maintenance & Repair
i have a 1986 bronco 2 when i try to start it it will run until i release it from the start position then its like you turned the key off. Not sure if its a relay or in the start switch, 2 Answers

I have fuel pressure and i have spark when im starting the truck. It cranks up then dies as soon as i let from the start position. Where do i begin

1986 Ford Bronco II

-

Maintenance & Repair
88 bronco 2 right front door power window regulator will not stay in the plastec holder that holds the regulator to the window hardware. I don't know where to find a new plastec holder. Ford said it's 1 Answer

88 bronco 2 right front power window regulater will not stay in the plastic holder that connects it to the glass hardware. Where can I find a new one or can this one be repaired?

1988 Ford Bronco II Eddie Bauer 4WD

-

Maintenance & Repair
O.K, I have a problem that has all the wizards I know {limited, but they try} scratching their heads, Bought a 1988 Bronco 2 2.9, 5sp. 13 Answers

the Bronco 2 was going start, no start intermittently for some time for the previous owner, He drained fuel and parked it., I picked it up for $300.00 for something to mess {haha,} with, first off f...

1988 Ford Bronco II XL 4WD

-

Maintenance & Repair
I need some help with my 88 ford bronco ii 2.9 v6. I just finished rebuilding the motor and i went to start it and the only thing i got was the check oil light. 7 Answers

All the wires are hooked up ive checked the starter switch clutch interlock switch replaced the starter solenoid and battery. I cant figure out whats wrong with it help please

1988 Ford Bronco II Eddie Bauer 4WD

-

Maintenance & Repair

Looking for a Used Bronco II in your area?

CarGurus has thousands of nationwide listings and the tools to find you a great deal.

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

I have a 1986 Ford Bronco 2 4x4 Eddie Bauer. After I get past 45 mph & press the gas pedal it stalls & can't go any faster (like it's in neutral) & then once it gets back down to about 35mph I can go again, but only back up to 45mph & then the same thing happens.What's the problem?Thx

3 Answers

Your Answer:

Looking for a Used Bronco II in your area?

Shortcuts

Search Ford Bronco II Questions

CarGurus Experts

Find great deals from top-rated dealers

Related Models For Sale

I have a 1986 Ford Bronco 2 4x4 Eddie Bauer. After I get past 45 mph & press the gas pedal it stalls & can't go any faster (like it's in neutral) & then once it gets back down to about 35mph I can go again, but only back up to 45mph & then the same thing happens.What's the problem?Thx

3 Answers

Your Answer:

Related Questions