88 bronco 2 right front door power window regulator will not stay in the plastec holder that holds the regulator to the window hardware. I don't know where to find a new plastec holder. Ford said it's

Asked by rmoses60 Jul 18, 2016 at 04:40 PM about the 1988 Ford Bronco II Eddie Bauer 4WD

Question type: Maintenance & Repair

88 bronco 2 right front power window regulater will not stay in the plastic
holder that connects it to the glass hardware. Where can I find a new one or can
this one be repaired?

42,455

Auto_Centric answered 8 years ago

Replace the window regulator available online.. don't waste time trying to repair it. $80 -$100 everywhere online.

Mark helpful

Your Answer:

88 bronco 2 right front door power window regulator will not stay in the plastec holder that holds the regulator to the window hardware. I don't know where to find a new plastec holder. Ford said it's 1 Answer

88 bronco 2 right front power window regulater will not stay in the plastic holder that connects it to the glass hardware. Where can I find a new one or can this one be repaired?

1988 Ford Bronco II Eddie Bauer 4WD

-

Maintenance & Repair
What is wrong with an 88 bronco 2 that will not make a sound, other then the fuel pump coming on, when you turn the key? 3 Answers

My brother has an 88 bronco 2 that will not start when you turn the key. He has replaced the starter solenoid and the fuel pump turns on but when he turns the key it wont even crank.

1988 Ford Bronco II XLT 4WD

-

Maintenance & Repair
Hey guys, i have a 1985 Bronco II, 2.8L, XLT. There is a hose that is missing from the side of my air filter housing that leads to the front of the vehicle. I have searched high and low for this replacement hose. I think my biggest problem is that I do not know what the part is actually called. Does anyone know what this part would be called? Thanks, upfront, for the help. 5 Answers

Hey guys, i have a 1985 Bronco II, 2.8L, XLT. There is a hose that is missing from the side of my air filter housing that leads to the front of the vehicle. I have searched high and low for this rep...

1985 Ford Bronco II XLT 4WD

-

Maintenance & Repair
I have a 1985 Bronco II standard shift, I need to change the ECM. where is it located? 1 Answer

I am trying to change out the Engine Control Module (ECM) where will I find it?

1985 Ford Bronco II XLT 4WD

-

Maintenance & Repair
O.K, I have a problem that has all the wizards I know {limited, but they try} scratching their heads, Bought a 1988 Bronco 2 2.9, 5sp. 13 Answers

the Bronco 2 was going start, no start intermittently for some time for the previous owner, He drained fuel and parked it., I picked it up for $300.00 for something to mess {haha,} with, first off f...

1988 Ford Bronco II XL 4WD

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.