firebird338 answered 9 years ago
If there is power coming from both sides of the motor and the switch is not being used the switch is bad. There should be power going to one side and should have power to other side when the switch is used and no power when switch is released.
Thank u after ing switch and wiring I found wiring between door and post broken repaired wiring and window worked fine thank u
my 1998 560 SL LRFT FRONT WINDOW NOT WORKING THERE IS POWER TO BOTH SIDE FO THE MOTOR
1989 Mercedes-Benz 560-Class 560SEC Coupe
-
Maintenance & Repair
i dont know how much gas i have because it stop working. why did it stop working
1990 Mercedes-Benz 560-Class 4 Dr 560SEL Sedan
-
Maintenance & Repair
I have a 560SL that's having issues with the fuel system. The mileage is extremely poor and blows black smoke when accelerating. The fuel injectors were recently replaced. If the past, I believe ...
1988 Mercedes-Benz 560-Class
-
Maintenance & Repair
My SLS will not raise up. It is not leaking it has the oil. What else could be wrong? Shocks maybe? And it is real bouncy when I go over speed bumps
1989 Mercedes-Benz 560-Class 560SEC Coupe
-
Maintenance & Repair
My 1988 560sl radiator light is on however the temperature gauge is always on the mark. Is this a sensor problem only? If so can anyone advise where the appropriate sensor maybe located?
1988 Mercedes-Benz 560-Class 560SL Convertible
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.