Auto_Centric answered 8 years ago
Most likely you disturbed an electrical harness or connection in the wheel arch area if turn indicator failed immediately after your brake service. If not check FUSE'S, BULB'S and there sockets along with the indicator switch. Use a Multimeter to check for 12.volts at the socket with switch on.
I replace the brake pads and sensors. Now the Blinkers will not work. What should I check or replace???
1984 Mercedes-Benz 300-Class 300D Turbodiesel Sedan
-
Maintenance & Repair
i have a 1977 Mercedes-Benz 300D with a good interior and engine but bad exterior (rust) should i try to fix it? and there is to what i know is a heater servo on the left side of the engine bay as u o...
Mercedes-Benz 300-Class
-
Maintenance & Repair
My 91 mercedes 300c keeps stalling on me when I step on the gas or sometimes sputters and almost stalls. I just bought the car and I am resaleing it but I don't want to put a bunch of money into it.
1991 Mercedes-Benz 300-Class 2 Dr 300CE Coupe
-
Maintenance & Repair
I was told that it is not a good idea to switch from regular oil to synthetic, was told it might create leaks and damage the engine. Your feedback is appreciated.
1989 Mercedes-Benz 300-Class 300CE Coupe
-
Maintenance & Repair
1981-1993 Mercedes-Benz 300D & 300SD sedan
1983 Mercedes-Benz 300-Class 300SD Turbodiesel Sedan
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.