After I put new oil pump won't start the motor crank but won't staying on
1 Answer
Auto_Centric answered 8 years ago
So the engine was running fine BEFORE the oil pump change? Now it starts and run then STALLS out?
Auto_Centric answered 8 years ago
So the engine was running fine BEFORE the oil pump change? Now it starts and run then STALLS out?
1984 Chevrolet Caprice Classic Sedan RWD
-
Maintenance & Repair
Im a car noob I know nothing about them. But, I thought it was the battery but it's not that. It could be the starter, it could be my carbonater however that is spelled. Please Help!!!!
1977 Chevrolet Caprice
-
Maintenance & Repair
My '92 Caprice Classic will run fine for a day and then will stall and die at a stop. Sometimes c an restart, bvut often have to remove the breather, start it, put the breather back on. Also stal...
1992 Chevrolet Caprice Classic Sedan RWD
-
Maintenance & Repair
I just put a rear end in my 1996 Chevy Caprice out of a 1994 Impala SS goes in reverse fine goals and second gear fine but it won't go in overdrive or drive you put in overdrive you can hear kiss t...
1996 Chevrolet Caprice Sedan RWD
-
Maintenance & Repair
I have a 91 Caprice with a 305 motor in it that won't stay running. Everything is new on the car is as follows: wires, spark plugs, cap, rotor, fuel filter, fuel pump, throttle position sensor, ign...
1991 Chevrolet Caprice Sedan RWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.