How to replace the headlights on a 1991 dodge dynasty le?

Bulbs or entire headlamp?

1. Remove the headlight bezel. 2. Unhook the spring from the headlight retaining ring if so equipped. 3. Unscrew the retaining ring and remove it. NOTE: Do not disturb the two long aiming screws. Conventional and Halogen headlamp sealed beams units are interchangeable in pairs, but it is recommended that they not be mixed together (one halogen and one conventional). It is fine to upgrade from conventional bulbs to halogen, but do not change from halogen bulbs to conventional bulbs, especially if the vehicle came equipped with halogen bulbs. 4. Unplug the old sealed beam from the engine electrical wiring harness. 5. Extract the old bulb from its mounting bracket. To install: 6. Connect the replacement bulb and install it into the receptacle (check operation of headlight before completing repair). 7. Install the retaining ring and secure it in place with the retaining screws. Connect the spring. 8. Install the headlight bezel. If you need pics try the autozone website repair manual section.

Hmmm, this car has sealed beams doesn't it?