96' Tracker Idle failure

Asked by porsche4277 Aug 27, 2013 at 12:07 PM about the 1996 Geo Tracker 2 Dr STD 4WD Convertible

Question type: Maintenance & Repair

I have a 96' tracker that runs quite well. All of a sudden last week the idle failed and the engine stalled. The idle has not come back so I have to pump gas to keep it from stalling. How do I remedy this-Thank you

31,215

yetilikesbeer answered 11 years ago

Try the IAC, Idle Air Control valve. It will be the larger sensor bolted to the throttle body (smaller one is the tps mounted to the rotating portion). When your do not give your vehicle throttle the throttle blade is shut. With the key on the IAC plunger will retract to let idle air pass around the throttle body blade. If it's cooked it will not open, thus no idling. You can unbolt the unit and test it. Should be extended and it should retract when the key is turned to on. Feel free to move it manually. If you do get it to start moving with the key try some carb cleaner and re-install it.

6 people found this helpful.

Mark helpful

18436572GMC answered 11 years ago

Also, clean the area around the throttle blade. Just wipe it clean with throttle body cleaner.

2 people found this helpful.

Mark helpful

Paul answered 5 years ago

Use some x66a from Hilo ! It smells like car piss . But works like a charm !!! Also it will get into the intake and do a little cleaning too.

Mark helpful