Why isn't my signal working?
Asked by Ggblazer Aug 02, 2020 at 08:02 PM about the 1991 Chevrolet S-10 Blazer 2 Dr Tahoe SUV
Question type: Maintenance & Repair
I have this 91 s10 blazer that has turn signal
problems. The left side works fine but the right
side doesn't. When the right signal is on, the arrow
comes on and stays on, however, neither the front
or back lights come on. The same thing happens
with the headlights on. I'm assuming it's the bulbs
but i don't know. Could this be a fuse? The grounds
are good but i have no right signal. Please help?
4 Answers
your relay is old most likely. The relays job is to interfered with the circuit and that is where you usually hear the tick tik tik and so forth. the relay is in your fuse box, most likely. pull it out and replace. on your headlight, those are also on circuit with a relay controlling juice as well. you might to research where that relay is .
Thank you! I'm replacing the bulbs tomorrow and I'll check the relay after. I do have one more question if you're up for it?
So, my windows wont roll down if I use the drivers side controls and the passenger side control will let the window roll down. The motors were always weak and need replaced soon, but would this be a control on the drivers side to get the windows to roll down and up or a connection somewhere?
