1992 geo...after shifting into drive,goes about thirty feet,and diengages..like shifting to neutral,cut car off,wait 10 sec. or so,crank back up,shifts into gear for another 30 or so feet,then have to repeat process

1992 geo...after shifting into drive,goes about thirty feet,and diengages..like shifting to neutral,cut car off,wait 10 sec. or so,crank back up,shifts into gear for another 30 or so feet,then have to repeat process 1 Answer

my son bought this 1992 1.0 Geo Metro 300 bucks with the head gasket blown clean up the head and engine block side l have pit's and little smash marks in the block side, do you think it will seal or 7 Answers

or do they have a special seal or gasket I can use the people my son bought the car from change the head gasket once before look like they smashed a hole in the new gasket where the bolt hole goes...

I have a 97 geo metro 3 cylider front crank seal leaking 1 Answer

I have a 97 geo metro 3 cylinder with a really bad front main seal leaking and would like to put this car back in service with gas going up up up!!!!! theres 200 thousand on the motor now so I dont re...

1992 Geo Metro Tranmission 2 Answers

My 92 Metro has 45,000 original and runs great but occasionally it will act as if it's loosing gas and stutter. It's not the transmission because I slow down or put it in neutral and "clear" up and k...

I have no compression 3 Answers

I have no compression, the timing belt is on right, everything seems to be in order. Any ideas?