Blower blows out cold air on low medium and high but very low on each setting . i replaced the bmsc and still haeve the same problem. should i switch out the blower?

Blower blows out cold air on low medium and high but very low on each setting . i replaced the bmsc and still haeve the same problem. should i switch out the blower? 2 Answers

My air or my heat won't work. It went out suddenly and without warning. What? on 2006 Ford Crown Victoria I've had the car going on 3 years. I bought it used. The air never blew through the vents, but 1 Answer

My air or my heat won't work. It went out suddenly and without warning. What? on 2006 Ford Crown Victoria I've had the car going on 3 years. I bought it used. The air never blew through the vents, b...

I have an 83 Ford LTD Crown Victoria. The fuel pump stays running when the key is on. Is this normal? The car will not start. There is pressure at the injectors and power at the injectors but no fuel comes out. If I dump gas on the carburetor, it will start but won't stay running. What do I do to fix this? 18 Answers

have an 83 Ford LTD Crown Victoria. The fuel pump stays running when the key is on. Is this normal? The car will not start. There is pressure at the injectors and power at the injectors but no f...

fan blower resistor 1 Answer

my a/c blower will only work on high, I have located the fan blower resistor under the hood on the fire wall. I can tap the fan blower resistor and the blower will work on low, medium and high but onl...

99 Crown Vic needs a control module/resistor which I was able to get with no problem; I also need a resistor which is on the engine side,of the firewall, and I have no diea what thispart is in order to replace it; a/c blower motor died 4 Answers

a/c working, though only on high, along with heat; compressor is fine, blower motor cut off; my mechanic tolde me to get a control module/resistor, as well as a resistorthat goes on the fire wall...