My right blinker doesn't work front or back. Even when I put hazards on rigt side still don't work any help would be appreciated
3 Answers
migration_judge_roy answered 11 years ago
your chassis ground is not electrically connected....very well...what you must do is follow the black 1/0 battery cable to where it attaches to ground...wirebrush the lug...wirebrush all the corrosion off the chassis too, to allow at least a clean 300 cold cranking amps through that connection...(the most important electrical connection there is)~
Have you checked the bulbs? Could also be a bad flasher relay.