05' F250 When I turn on the 4x4 switch nothing happens does not engage, if I turn the hubs to manual lock everything is fine. Works normal and no noise in either position. What should I look for to solve this issue?

05' F250 When I turn on the 4x4 switch nothing happens does not engage, if I turn the hubs to manual lock everything is fine. Works normal and no noise in either position. What should I look for to solve this issue? 1 Answer

Searched for: My 2010 F250 4x4 pulls to the right or left when in two wheel operation if I accelerate from a stopped position with wheels turned to take a corner. What is the issue? Please, and Thank you. 1 Answer

When in 2WD and starting from a stop.... If I turn the wheels to take a right or left ...sometimes.... it feels as if the truck differential is locked into the turn and will not disengage. The res...

I have 1999 f250 the key will not start it. It has a new ignition switch and power goes to it, but the key will not not turn it far enough to the start position, got any answers? 3 Answers

I have checked most thing out and it is somewhere between the key and the ignition switch.

2003 Ford F250 5.4L 4x4. I have the automatic transmission and manual transfer case and manual hubs. I go to put it in 4x4 Hi and Lo the Light indicates that it is on but all four of my wheels arent 3 Answers

aren't engaging. what could the issue be? I'm new to the big truck world.

I have a ford f250 SD 4x4. When I accelerate I get a vibration under the truck but as I reach the higher gears it stops...any idea's on what causes this? 4 Answers

I have a ford f250 SD 4x4. When I accelerate I get a vibration under the truck but as I reach the higher gears it stops...any idea's on what causes this? Also how do I engage and disengage the manual ...