Asked by redskins333 Nov 10, 2018 at 03:28 PM about the 2000 Ford Excursion Limited 4WD
Question type: Maintenance & Repair
GETTING ERR CODE P0720 OUTPUT SPEED SENSOR INSUFFICIENT INPUT CODE
The above answer is incorrect. A P01720 error is the output speed sensor on the transmission. It is located on the rear drivers side of the case. Common fault code on older Fords. Quick, cheap, easy DIY swap.
GETTING ERR CODE P0720 OUTPUT SPEED SENSOR INSUFFICIENT INPUT CODE
2000 Ford Excursion Limited 4WD
-
Maintenance & Repair
My son took my Excursion to his cousins. Started fine as always. Goes to leave to head to work and gets two block and the truck dies and he could not get the truck started. Great cranking of the motor...
2000 Ford Excursion Limited 4WD
-
Maintenance & Repair
2000 6.8 V- 10 4x4 Ford Excursion Limited Gas .I was driving pulling 2 1/2 tons when the truck started to have an exhaust sound coming from top center of motor . Seems like it is coming from just...
2000 Ford Excursion Limited 4WD
-
Maintenance & Repair
Need location of fuel pump module for a 02 excursion 6.8
2002 Ford Excursion Limited
-
Maintenance & Repair
I have a 2000 Ford Excursion 7.3 and I stopped to get fuel and turned it off pumped my fuel went inside and came back out and it wouldn’t start!?! Ugh my husband put a new fuel filter in, a new C...
2000 Ford Excursion Limited
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.