I have a 2000 ford expedition 4WD 5.4L triton motor I put a new starter solenoid and new battery and cables on it and still just making a single clicking noise any suggestions
Asked by migration_davidwiley... May 22, 2014 at 07:03 PM about the 2000 Ford Expedition XLT 4WD
Question type: Maintenance & Repair
I have a 2000 ford expedition 4WD 5.4L triton motor I put a new starter solenoid and new battery and cables on it and still just making a single clicking noise any suggestions
7 Answers
Did you have the battery tested? Not" do the headlights come on" but an actual Load test.
Is your motor froze up? See if you can turn it over with a breaker bar on the front pulley nut. If you can't turn it over, pull the plugs and try again. Has the car been sitting for a long time? Any other history we should know about.
demondburns answered 8 years ago
I have the same problem and I don't know what to do my car has been sitting up for almost two wks what to do?
The same answer applies to you also. WARNING: the plugs on the 5.4 can (will) give you a lot of problems. Google removing them.
There are 2 solenoids on the 2000 ford expedition. One on the firewall and one on the starter.
Where is the solenoid located on a firewall on the driver side door on the driver side I haven't seen what I've been looking