My a/c compressor is not working I checked for voltage at the harness going to the compressor 13.5...is the compressor bad?

My a/c compressor is not working I checked for voltage at the harness going to the compressor 13.5...is the compressor bad? 3 Answers

I have a 2000 Ford Explorer and the A/C is not working; won't blow cold air. compressor or leak? 3 Answers

It's a vehicle I''m thinking of purchasing for 2000 dollars but the a/c is not working. The owner says she had them put freon(?) in it but thinks it leaked out....does it need a new compressor and if ...

I'm trying to fix the heater in my 1966 Ford Mustang, and I read in an answer on here concerning the switches for the heater "Also all 3 of those control levers are hooked to cables. Look under the dash and check to make sure those cables are connected and not broken. Sometimes they stiffen up and break." If one of these (the one reading "heat") were broken, would it stop the heater from starting even though all the other parts are working? And if so, what solution is there to reaffix the switch to its respective cable? 1 Answer

Attempting to fix a 1966 Ford Mustang's heater. One of the switches inside of the car is disconnected from its cable, which has broken. What's the fix?

AC Compressor 1 Answer

As i was driving home home yesterday during the afternoon commute i suddenly noticed a smoke smell coming in through my cabin.So i got off and saw smoke coming from the AC Comprssor Clutch my only...

i have a 2000 ford mustang v6 guages went crazy when i backed up and the car died, put it park - restarted it. ran fine till i put in drive, guages bounced between max and minimum then it died again and now will not start. the remote trunk key chain - when i push to unlock the trunk or any of the other functions make the relays click under the dash. so is it my relays or something else 3 Answers

i have a 2000 ford mustang v6 guages went crazy when i backed up and the car died, put it park - restarted it. ran fine till i put in drive, guages bounced between max and minimum then it died again...