running lean on bank 1 & 2/replaced o2 censors/plugs/wires/still not right shoud i replace catalitic converter

running lean on bank 1 & 2/replaced o2 censors/plugs/wires/still not right shoud i replace catalitic converter 1 Answer

Bank 1&2 running lean. 2 Answers

Banks 1&2 are running lean on my 2000 3L ranger xlt. It runs really rough. Don’t want to idle. Had scan tool on it. It gave me a few codes. The tube from EGR valve was rotten. Fixed that. Replace...

I have a 1998 ford ranger automatic 3.0 v6 it looses power (sometimes) in the lower gears..Was told there is a misfire on #2 an#5or4. I replaced the ignition coil an got new sparkplugs an coil wires. 2 Answers

I have a 1998 ford ranger automatic 3.0 v6 it looses power (sometimes) in the lower gears..Was told there is a misfire on #2 an#5or4. I replaced the ignition coil an got new sparkplugs an coil wire...

1990 Ford Ranger not picking up the fuel. Replaced the fuel pump and I still not getting any fuel. The pump is not running. 1 Answer

Brand new Fuel pump made by Precision , not working ... checked relay, it's good.

1996 Ford ranger not running right 1 Answer

My truck was running fine. I had to pull my battery off to use it on another vehicle. When I but it back on my truck an crunk it up it wont stay running and acts like it is trying to flood out