Truck will turn over but won't start up.

10

Asked by andrewfranks Mar 27, 2016 at 12:33 PM about the 1993 Chevrolet C/K 1500 Silverado Extended Cab LB 4WD

Question type: Maintenance & Repair

Okay I've been trying to figure this out for 3
days now and can't figure it out. I got about
1000 yards from my house when I lost the
gas peddle, break and steering then the
battery, service engine soon and check
gauges lite up on the dash. ( engine was still
running when I pulled over into a parking lot)
I shut it off then went to restart it and it
would only crank that's it and those lights
were still on the dash. I changed the battery
because it was showing very low I got it
tested at AutoZone they said it was bad. I
also changed the ignition coil still doing the
same thing. I was told to check the oil
because some Chevy's fire under oil
pressure, so I did and i had no engine oil at
all. I had just changed the engine oil and
tyranny oil right before winter hit around
November so I don't know where the hell all
of the engine oil went it doesn't leak and I've
not once smelled burnnimg oil. I put oil in
still nothing also I turned the key over to
check what codes come up and it only
comes up with code 12 ( one flash stop two
flashes stop ) AutoZone said it is something
about oil. One more thing I'm getting fuel but
it won't spark if anyone knows please let me
know. I have a 93 Chevy Silverado 5.7 ext
cab k1500 4WD also in September I put all
new cap, rotor, spark plugs and wires.

10 Answers

223,755

Sounds like you forgot to put oil in it when you changed it. Two things that need to be checked for spark would be the Ignition Control Module, and the coil pick-up. The ICM can be taken out and checked at Auto Zone and the pick-up coil, there are two wires that run to it. Gently pull on them to see if there attached. Usually a wire will break for it to be bad.

10

I figured out what it was yesterday it was the Ignition Control Module i had AutoZone test it out and it failed every test but one. It runs a lot better than it did before and will drive done the road its still giving me a fit and the check gauges lights keeps coming on.

10

When I put the key in to check what codes come up 12 is the only code that none stop shows on the dash

223,755

But thats a few months ago. If you have a voltmeter you can check to see if there is 14.3 to 14.7 DCV at the battery when the truck is running.

1 people found this helpful.
223,755

The code 12 is what you want. That is saying that the sensors on the engine are not picking up anything wrong there. You have something else going on. Check that fuse for the gauges and all fuses, I believe there is one for the PCM also.

1 people found this helpful.
10

I just started it and checked it. It's reading normal and too low. As for the fuses I changed all of them so they're all new

Your Answer:

C/K 1500

Looking for a Used C/K 1500 in your area?

CarGurus has 4 nationwide C/K 1500 listings and the tools to find you a great deal.

Postal Code:

CarGurus Experts

  • #1
    Andrew Olsen
    Reputation
    15,920
  • #2
    Rowefast
    Reputation
    9,670
  • #3
    John Saffrahn
    Reputation
    6,470
View All

Find great deals from top-rated dealers

Search

Related Models For Sale

Used GMC Sierra 1500
131 Great Deals out of 6,881 listings starting at $3,975
Used Ford F-150
304 Great Deals out of 15,343 listings starting at $1,954
Used Chevrolet Camaro
24 Great Deals out of 344 listings starting at $10,500
Used Chevrolet Corvette
22 Great Deals out of 1,004 listings starting at $19,500
Used Dodge RAM 1500
7 Great Deals out of 80 listings starting at $4,000
Used Chevrolet S-10
2 listings starting at $12,975

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.