Cylinder 1 and 6 misfire
I have a 2000 Ford Taurus se 3.0l ohv I replaced
spark plugs, wires, fuel injectors, alternator, coil
pack and after about two three months it has a
misfire on cylinder 1 and 6 so after weeks of trouble
shooting I found 2 vacuum lines that were not
Getting vacuum I traced them back to a egr
pressure regulator I changed it out and got my
vacuum back but I still have the misfires and there
were two more lines not getting vacuum I traced
them to a evap vacuum solenoid I changed it out
and I still have no vacuum
To those two lines and a bad misfire please help
there is nothing left that can be wrong I have fuel
compression and spark the mass air flow sensor is
good I have ran out of options