I have a 2003 Jeep Liberty. The check engine light came on. The people that did a diagnostic test on it said the code was P0734. When I'm at a stoplight it acts like it's trying to change gears. Any idea what could be wrong with the transmission?

I have a 2003 Jeep Liberty. The check engine light came on. The people that did a diagnostic test on it said the code was P0734. When I'm at a stoplight it acts like it's trying to change gears. Any idea what could be wrong with the transmission? 1 Answer

2004 Jeep Liberty Engine light on for a few days and now off after trying to get the error codes 2 Answers

My 2004 Jeep Liberty engine light came on a few days ago. I did the turn the key three times trick to see what the error code was, and when I did this nothing appeared. After attempting this, I turn...

Why does the transmission fluid have to be changed in a 2006 Jeep Liberty when the owners manual says the transmission fluid installed at the factory is good for the life of the car unless contaminated with water. Normal wear and tear on the transmission will make it dark... so why would the manufaturer write that in the owners manual? 4 Answers

I took my Liberty to a Jeep Dealership and they told me because my tran. fluid was dark it needed changing. Yet my owners manual says, under normal conditions it should never need changing FOR THE L...

2002 Jeep liberty sport 3.7 diagnostic reading shows that the ignition was tampered with and vehicle stolen.a d the starter making g a racket like it turns.over then it sounds like a wheel stripped orsomething 1 Answer

2002 Jeep liberty 3.7 had to boost ,battery,then when u turn the key.over.it tries to turn over then tit won't catch and the.stater makes a terrible racket

I have a 2002 jeep liberty that the engine went bad in. I was going to overhaul it but found out the block was no good. I got a bottom end ( block, crank and pistons ) from a salvage yard and overhauled it. I got it all back together with the original heads and all the other things from the original engine, crank sensor, cam sensor, new coil packs,new spark plugs,,,,,, everything is brand new. But now I have no spark. What could my problem be ? 2 Answers

2002 Jeep Liberty 3.7L. New Overhaul, no spark.