98 Grand Cherokee 4.0L No Start
OK, this all started with the classic stalling issue that seems to be related to
the PCM. Checked PCM solder joints and looked like I had two that were
cracked so I have resoldered those. After resinstalling the PCM, I get no
start. Before I consider that the PCM is bad, is there something I could be
missing? Is there something special that needs to be done so the computer
"learns" again? I run across some cars where you have to turn the key for
15 min, then off for a few to 15 min, then on again. Does this thing have
something I need to do? Thanks for any advice.