1969 Chevy pickup motor mounts
Asked by Guru91WRNX Dec 11, 2021 at 11:31 AM about the 1969 Chevrolet C/K 10 RWD
Question type: Car Customization
I have a 1969 c-10 Chevy pickup with a 6 cyl I want to put a 283 in it I need
motor mounts what kind of motor mounts? Thank you
2 Answers
Your I6 motor mounts will work if you have the 230 or 250 I6 Engine. (If you have a 292 I6 in your C10 only one side will work it's the driverside frame mount. The passinger side is special it's made just for the C10 292 I6, no other Engine) If you have the 230 or 250 I6 Engine Just use the bottom half, take off the top half and then bolt the new V8 side engine motor mount pads onto your I6 bottoms (might be only one bolt holding the top part to bottom?) then you have 3 bolts that bolt unto the side of the V8 engine. Or if you don't like the factory type Motor Mounts go buy some Aftermarket Motor Mounts from a Speed Shop and your good to go. *The Aftermarket Motor Mounts are better and easier to use to tell you from my experience.* 1Nimrod (Dustin)